The Sound Advance® FastMount® series consists of three extendedbandwidth loudspeakers that establish a new benchmark for ruggedness, weather-resistance, ease of installation and performance in commercial/professional outdoor speakers. All FastMount models feature a polypropylene cone woofer (FMS860: 8"; FMS660: 6-1/2"; FMS530: 5-1/4") and a 1" polyurethane dome tweeter that ensure superior-quality sound even in outdoor areas with minimal reflecting surfaces. The exclusive patent-pending FastMount bracket allows these loudspeakers to literally snap and lock securely into place. Removal is performed via a hidden release tab located behind the speaker grille. These new brackets make it easy for installers to mount FastMount loudspeakers as close as one inch to the mounting surface in a vertical or horizontal position, on a pole or across a corner. Once in place, FastMount loudspeakers can pivot 180 degrees and can be rotated by a regulated indexed position system that ensures consistent placement from one speaker to another for uniform appearance and accurate soundfield reproduction. An equally valuable, all-new FastMount feature is a new Protected-Access Connection Terminal (PACT) that protects wire connectors from weather corrosion while making installation easier. PACT accepts input cabling via concealed,
weatherproof, rubber-grommeted rear-panel ports and directs it to the front, baffle-side of each loudspeaker. Signal connections are made there, behind a sealed access panel, while the speaker is secure in its mounting bracket. This eliminates any risky acrobatics on ladders for installers. FastMount speakers are transformer-coupled, with taps for both 70V and 100V operation and 8-ohm bypass. All FastMount models feature a rugged, paintable, weather-resistant polypropylene enclosure and a paintable perforated aluminum grille, and are available in black and white.
Specifications:
Tweeter 1" (25mm) polyurethane dome
Woofer 6 1/2" (165mm) one-piece black polypropylene cone with a rubber surround
Frequency Response 55Hz - 20kHz - ±3dB
Sensitivity 89dB (2.83V/1 meter)
Transformer Taps
Primary voltage: 70V, 100V
Primary taps (70V): 7.5W, 15W, 30W, 60W
Primary taps (100V): 15W, 30W, 60W
8-ohm bypass
Power Handling 5 watts minimum; 80 watts maximum
Enclosure Material Polypropylene (sealed)
Baffle Material Polypropylene
Grille Paintable weather resistant aluminum
Input Termination 4 post barrier strip
Dimensions (WxHxD) 7 1/2" x 12" x 7 1/8" (191mm x 305mm x 181mm)
Shipping Weight 14 lbs (6.4kg) pair
Available Colours Black and white