PTZ Cameras

AO-CM40-B

Product Code: AO-CM40-B

Brand
Avonic
RRP $3,499.00
 
 
Unit of Measure
EACH

 

2 Year
Features
  • Panasonic high-quality 1/2.8 inch, 2.07 million effective pixels HD CMOS sensor
  • The output frame rate up to 60fps in 1080P
  • 20x Optical Zoom, glass lens.
  • Remote Control Using RS232/485 interface, all the parameters of the camera can be remotely controlled.
  • Leading autofocus algorithm for a fast, accurate and stable auto-focusing lens.
  • Low noise and High SNR: Low Noise CMOS effectively ensures high SNR of the camera.
  • Advanced 2D/3D noise reduction technology is also used to further reduce the noise while ensuring image sharpness.
  • High accuracy, silent step driving motor makes for accurate fast and quiet panning and tilting.
  • Multi-Format Video Outputs: HDMI 1.4a, 3G-SDI, USB2.0.
  • The 3G-SDI is available for 100m transmission at 1080p60 format (SMPTE 424M). The output image is 8-bit YCbCr 4:2:2 level A (SMPTE 425M).
  • Auto-Flip function
  • Low-power sleep function: the consumption is lower than 500mW in sleep mode.
  • Supports Multiple Control Protocols: VISCA, PELCO-D, PELCO-P protocols which can also be automatically recognized.
Technical Specifications
Brands Avonic
Native Resolution 1080p
  • Details
  • Downloads
  • Where to Buy
  • Ordering

Specifications

Video Resolutions: 1920x1080/1280x72060p/50/30/25/59.94/29.97/1920x1080 i60/50/59.94
Sensor: 1/2.8” CMOS, 2.07mp, 16:9
Shutter: Auto, Manual
Zoom/ Aperture/ Focal length: 20x topical/ F1.6-F11/ 4.9-98 mm
Minimum Illumination: 0.5 lux (F1.8, AGC On)
White Balance: Auto, Manual, OnePush, 3000K-7000K in steps of 500K
Backlight Compensation: Supported
Digital Noise Reduction: 2D & 3D DNR
Signal Noise Ratio: >55 dB
Horizontal FOV wide ~ tele: 57° ~ 6.3°
Vertical FOV wide ~tele: 36.5° ~ 3.6°
Horizontal rotation: -170° ~ +170°
Vertical rotation: -30° ~ +90°
Pan speed range: 0.1 ~ 100°/s
Tilt speed range: 0.1 ~ 70°/s
H&V image flip: supported
Number of presets: 255
Preset accuracy: 0.1°
Audio line in: Embeds audio on HDMI and SDI

Interface

HDMI output: 1080p60
SDI output: 1080p60, SMPTE 425M level A, 8-bit YCbCr 4:2:2
USB output: 1080p30 USB2.0
Network interface: RJ45 for IP control and FW update
IP control protocol: Visca over IP
Line in: 3.5mm female jack connector
Serial communication: RS232 8DIN + RS485 2pin Phoenix
Serial protocol: VISCA, PELCO-P, PELCO-D
Input voltage:12V
PoE: N/A

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.

Shipping

Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Australia Post and Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 

Tracking

You can track your shipment through the web sites of our couriers:

Australia Post

Star Track Express 

We will email the tracking number for your shipment shortly after it’s been despatched. If you have any questions regarding shipping, please contact us.

Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.

Returns

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.