Control

This is a Special Order Item

Barix Barionet R6 Relay No PSU BAR20049041 BARIX

Product Code: BX-BAR20049041

Brand
Barix
RRP $379.00
 
 
Unit of Measure
EACH

 

3 Months
Technical Specifications
Brands Barix
Product type I/O device
  • Details
  • Downloads
  • Where to Buy
  • Ordering

BARIX R6


Modbus remote I/O module with serial RS-485 Modbus/RTU interface, and 6 high current relays (230VAC,16A), UL listed, DIN Rail mountable

Barix R6 is a DIN-rail mountable relay module for commercial control, power switching and home automation applications.

Using the industry standard Modbus protocol over 2-wire RS-485 the device can be controlled from any Modbus capable master.

Each relay has three connections (common, normally closed and normally open) available at screw terminal blocks supporting wires from AWG 26 / 0.15 mm² up to AWG 14 / 2.5 mm².

To connect to other Barix devices the Barix R6 features two extension connectors on both sides of the device carrying power and RS-485 signals (one extension cable included). Barix R6 supports Modbus/RTU protocol at speeds of 9’600 and 19’200 Bauds, with and without parity. Special commands have been added to the Barionet R6 to support also non Modbus native control systems. Up to 31 Barix extension units can be directly connected to a Modbus Master such as the Barix Barionet and can be increased to up to 250 devices using standard RS-485 repeaters. Using the Barix Barionet, the Barix R6 can be controlled by a local Basic application (BCL) as well as remotely using TCP, UDP, Modbus/TCP and SNMP.

Barix R6 is a low cost alternative to add high power switching capabilities to Modbus systems.

A mounting bracket is available as an accessory


Applications Barix R6

  • Switching power (lights, blinds, heating, power relays, motors)
  • Activate bells, door strikes, indicators and alarms

Software Barix R6 available

  • 6 relays (250 VAC 10 A, NO & NC)
  • RS-485 serial interface
  • Protocol: Modbus/RTU
  • Two extension connectors for easy daisy chaining of power supply, additional relay units (R6), I/O units (IO12) etc.

Specifications

Relays

  • 6 relays (250 VAC 10 A, 16 Amax <1sec) on screw block with common, NO (normally open) and NC (normally closed) contacts
  • for wires AWG 26 – AWG 14 / 0.15 – 2.5 mm²

RS-485 / Power / Expansion

  • Power/RS-485 on detachable screw block for wires AWG 28 – AWG 16 / 0.08 – 1.3 mm²
  • 2 extension connectors (3”/75 mm cable incl.)

RS-485 / Protocol

  • RS-485 (2-wire), 9’600/19’200 Baud, 8 bit, Even/No parity software configurable,
  • Modbus/RTU protocol

Misc

  • 1 LED for power indication
  • 1 LED for RS-485 active send indication
  • 6 LED for relay status indication
  • Internal connector for default settings jumper

Power supply requirements

  • 12 to 24 VAC / 9 to 30 VDC
  • 3.5 Watt max. (all relays active)

Case

  • high quality plastic, 220 grams, DIN-rail mount.
  • 4.13“ x 3.34“ x 2.83“/105 mm x 85 mm x 32 mm

MTBF

  • Min. 237 000h acc. to MIL217F at 25°C ambient temperature

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.

Shipping

Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Australia Post and Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 

Tracking

You can track your shipment through the web sites of our couriers:

Australia Post

Star Track Express 

We will email the tracking number for your shipment shortly after it’s been despatched. If you have any questions regarding shipping, please contact us.

Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.

Returns

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.