Broadcast

  • Beam Low Latency Long Range HD-SDI Transmitter/Receiver pr V-Mount, Teradek
This is a Special Order Item

Beam Low Latency Long Range HD-SDI Transmitter/Receiver pr V-Mount, Teradek

Product Code: TD-10-0571

Brand
Teradek
$8,475.00 inc GST
RRP $8,475.00
 
Out of Stock
Increase value Decrease value
Unit of Measure
PAIR

 

1 Year
Technical Specifications
Brands Teradek
Series Beam
Input/output type HD-SDI
  • Details
  • Downloads
  • Where to Buy
  • Ordering

Beam Set Low Latency Long Range HD-SDI Transmitter/Receiver pr Gold Mount


TX Mount: V Mount
RX Mount: No Mount

Overview
Teradek Beam Transmitter/Receiver Set
The Teradek Beam Transmitter Receiver set comes with 1 Beam Transmitter and 1 Beam Receiver in an SKB Case.

Beam is multicast capable to an unlimited number of Rx over LAN and to up to 4 receivers over WiFi.
This set contains 1 Receiver but please consider purchasing additional Beam Receivers.

1 Beam Transmitter

The Beam Transmitter has 3G-SDI Input, is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 50Mbps* using unlicensed 5GHz band with a range of 2500ft with just 2 frames of latency.

*Transmitting above 30Mbps requires using the LAN port.

1 Beam Receiver

This set comes with 1 Beam Receiver with 3G-SDI Output and includes a dedicated bidirectional IFB channel.



What's In The Box?
  • 1 x Beam Transmitter with a V Mount plate
  • 1 x Beam Receiver with No Mounting plate1 x Protective SKB Case - military-standard waterproof hard case with custom foam
  • 1 x 110-240V AC Power Adapter
  • 3 x Transmitter Antennas
  • 3 x Receiver Antennas
  • 1 x Lightstand Adapter 1/4 20"
  • 1 x Thumb Screw
  • 1 x Quickstart Guide
  • 1 x BNC Cable 10inch
  • 1 x 1-Year Warranty

Specifications


Beam TX - AB Mount

Video
  • Video Inputs
    • 3G/HD/SD-SDI:BNC
  • Sdi Compliance
    • SMPTE 259M BI.656: SDTV Digital Signal/Data Serial Digital Interface
    • SMPTE 292M BT.1120: 1.5Gb/s Signal/Data Serial Digital Interface
    • SMPTE 425M: 3Gb/s Signal/Data Serial Digital Interface
    • SMPTE 299M: 16bit Digital Audio Format for SMPTE 292M
    • SMPTE 352M: Video Payload Identification for Digital Interfaces
  • Video Outputs
    • Looping 3G/HD/SD-SDI: BNC
  • Delay Tx To Rx
    • 90-110 milliseconds
Supported Resolutions
  • 1080p23.98/24/25/29.97/30/50/59.94/60
  • 1080PsF23.98/24/25/29.97/30
  • 1080i50/59.94/60
  • 720p23.98/24/25/29.97/30/50/59.94/60
  • 576i50 (PAL)
  • 480i59.94 (NTSC)/480i60 (861-D)
Video Processing
  • Video Compression
    • H.264 Baseline Profile Level
    • 4.2 with De-Interlacing
  • Supported Video Bitrate
    • RTSP Server - Up to 30Mbps
    • MPEG2-TS Server - Up to 15Mbps
  • Color Correction
    • None
Inputs
  • Audio Input
    • Main Digital Audio In
    • • SDI embedded audio: 48kHz 16-bit stereo linear PCM
    • Talk Back Analog Audio In
    • • 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
Outputs
  • Audio Output
    • Main Digital Audio Out
    • • SDI embedded audio: 48kHz 16-bit stereo linear PCM
Physical
  • Dimensions
    • 6.7" x 4.1" x 1.1" (170 x 105 x 28 mm)
  • Weight
    • 34.92oz (990g)
Interfaces
  • Http
    • Feature-rich WebUI for configuration and control
  • Configuration Interfaces
    • OLED Display with joystick Navigation buttons
  • Switches
    • On/Off and Reset Switch
  • External Control
    • Full duplex RS422 serial port
Network
  • Ethernet
    • 10/100 BASE-TX, RJ-45 jack
  • Wireless
    • WiFi:IEEE 802.11a/n: OFDM
    • Frequencies - U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz)
    • Wireless Protected Setup for easy set up and security configuration
  • Usb
    • Factory Reset
    • IP configuration or firmware upgrade without PC
  • Encryption
    • 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES
  • Rf Power
    • Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna
    • Radio Standard - IEEE 802.11a/n: OFDM
    • Antenna - 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW
  • Range
    • 2500 ft+-200 ft
  • Unicast Multicast
    • Multicast
    • WiFi: Up to 4 Receivers
    • LAN: No limit on number of receivers
Power
  • Power Input
    • 7V-17V DC
  • Nominal Power Consumption
    • 12 W
Environmental
  • Operating Temperature
    • 0 ~ 50 deg-C

Beam RX - No Mount

Video
  • Sdi Compliance
    • SMPTE 259M BI.656: SDTV Digital Signal/Data Serial Digital Interface
    • SMPTE 292M BT.1120: 1.5Gb/s Signal/Data Serial Digital Interface
    • SMPTE 425M: 3Gb/s Signal/Data Serial Digital Interface
    • SMPTE 299M: 16bit Digital Audio Format for SMPTE 292M
    • SMPTE 352M: Video Payload Identification for Digital Interfaces
  • Video Outputs
    • Looping 3G/HD/SD-SDI: BNC
  • Delay Tx To Rx
    • 90-110 milliseconds
Supported Resolutions
  • 1080i50,59.94, 60
  • 1080PsF23.98,24, 25, 29.97, 30
  • 1080p23.98, 24,25, 29.97, 30, 50, 59.94, 60
  • 720p23.98, 24, 25,29.97, 30, 50, 59.94, 60
  • 576i50 (PAL)
  • 480i59.94 (NTSC), 480i60 (861-D)
Video Processing
  • Video Compression
    • H.264 Baseline Profile Level
    • 4.2 with de-interlacing
  • Supported Video Bitrate
    • RTSP Server - Up to 30Mbps
    • MPEG2-TS Server - Up to 15Mbps
  • Color Correction
    • None
Inputs
  • Audio Input
    • Main Digital Audio In
    • • SDI embedded audio: 48kHz 16-bit stereo linear PCM
    • Talk-Back Analog Audio In
    • • 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
Outputs
  • Audio Output
    • Main Digital Audio Out
    • • SDI embedded audio: 48 kHz 16-bit stereo linear PCM
    • Main Analog Audio Out
    • • 48 kHz 16-bit stereo linear PCM with mini stereo phone output jack
Physical
  • Dimensions
    • 6.7" x 4.1" x 1.1" (170 x 105 x 28 mm)
  • Weight
    • 21.5oz (610g)
Interfaces
  • Http
    • Feature-rich WebUI for configuration and control
  • Configuration Interfaces
    • OLED Display with joystick Navigation buttons
  • Switches
    • On/Off and Reset Switch
  • External Control
    • Full duplex RS422 serial port
Network
  • Ethernet
    • 10/100 BASE-TX, RJ-45 jack
  • Wireless
    • WiFi:IEEE 802.11a/n: OFDM
    • Frequencies - U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz)
    • Wireless Protected Setup for easy set up and security configuration
  • Usb
    • Factory reset
    • IP configuration or firmware upgrade without PC
  • Encryption
    • 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES
  • Rf Power
    • Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna
    • Radio Standard - IEEE 802.11a/n: OFDM
    • Antenna - 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW
  • Range
    • 2500 ft+-200 ft
  • Unicast Multicast
    • Multicast
  • WiFi: Up to 4 Receivers
    • LAN: No limit on number of receivers
Power
  • Power Input
    • 7V-17V DC
  • Nominal Power Consumption
    • 12 W
Environmental
  • Operating Temperature
    • 0 ~ 50 deg-C

Product Documents

No documents available

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.

Shipping

Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Australia Post and Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 

Tracking

You can track your shipment through the web sites of our couriers:

Australia Post

Star Track Express 

We will email the tracking number for your shipment shortly after it’s been despatched. If you have any questions regarding shipping, please contact us.

Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.

Returns

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.  

Related Products

$8,475.00 inc GST
RRP $8,475.00
 
(Pair)
Increase value Decrease value
$8,985.00 inc GST
RRP $8,985.00
 
(Pair)
Increase value Decrease value
$8,985.00 inc GST
RRP $8,985.00
 
(Pair)
Increase value Decrease value