Signal extension

This is a Special Order Item

EXT-UHDA-HBTL-RX 4K UHD HDBaseT Receiver with audio de-embdder


$569.00 inc GST
RRP $569.00
In Stock
Increase value Decrease value
Unit of Measure


3 Year
Technical Specifications
Brands Gefen
Input/output type HDMI
  • Details
  • Downloads
  • Where to Buy
  • Ordering

4K Ultra HD HDBaseT Receiver w/ Audio De-Embedder and POH


Extend HDMI with audio breakout up to 70 meters/230 feet, over a single CAT-5

The Gefen EXT-UHDA-HBTL-RX is a high-performance HDBaseT™ Receiver that can extend HDMI up to 70 meters (230 feet) at 1080p and 40 meters (130 feet) at 4K, over a single CAT-5e cable. It also de-embeds analog L/R, TOSLINK® optical digital, and coaxial digital audio from the video for use with a separate audio system, enhancing the impact of presentations. This Receiver uses Gefen’s implementation of the HDBaseT™ technology with enhanced functionality. It accommodates 10.2 Gbps of data throughput and 300 MHz TMDS Clock frequency, and supports HDMI 2.0 resolutions up to 4K Cinema-DCI (4096 x 2160 to 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:2:0, or 30 Hz 4:4:4), with HDCP 2.2 or 1.4. Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ are passed through to the HDMI output. The EXT-UHDA-HBTL-RX also extends RS-232 and 2-way IR when used with a compatible Sender unit, facilitating the control of A/V sources placed near the Sender from the viewing location, and sending commands from the head end to control the display or another device placed near the Receiver unit. It can also send RS-232 commands from a third-party controller placed by the Receiver, for switching, scaler controls, and EDID management of a compatible Sender unit. Bi-Directional HDBaseT™ standard POH (Power Over HDBaseT™) technology can supply power remotely from the Receiver unit to a compatible Sender unit, or it can pass power from a compatible Sender unit to the Receiver, using the same CAT-5 cable that extends the HDMI signal. Only one of the two units will need a power supply. This feature simplifies installation in cases when an electrical outlet may not be available near the source or the display. The Receiver’s small, ultra-low-profile enclosure can be securely surface-mounted and conveniently hidden away from sight behind the display. It also accommodates a Gefen locking power supply plug for secure connection.

Shielded (STP) CAT-5e or better cable is recommended. Unshielded (UTP) CAT-5e or better cable may be acceptable depending on cable quality but is not the preferred choice. Care should always be given to keep these cables away from power lines and other sources of electromagnetic interference.

Gefen EXT-UHDA-HBTL-RX Features at a Glance
  • Supports 300 MHz TMDS Clock and data throughput of up to 10.2 Gbps
  • Extends HDMI, 2-way IR, and RS-232 over a single CAT-5e:
    • 4K Ultra HD (3840 x 2160 @ 60 Hz, 4:2:0), up to 130 feet/40 meters (8-bit color)
    • 4K Ultra HD (3840 x 2160 @ 30 Hz, 4:4:4), up to 130 feet/40 meters (8-bit color)
    • 4K Cinema-DCI (4096 x 2160 @ 24 or 30 Hz 4:4:4), up to 130 feet/40 meters (8-bit color)
    • 1080p Full HD (60 Hz) or WUXGA (1920x1200 @ 60 Hz), up to 230 feet/70 meters (up to 12-bit Deep Color)
  • HDMI Features Supported:
    • HDMI 2.0
    • HDCP 2.2 and 1.4
    • 12-bit Deep Color (at 1080p)
    • LPCM 7.1, Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ pass-through
    • 3DTV pass-through
    • CEC pass-through
    • Lip Sync pass-through
  • RS-232 control of switching, scaler, and EDID management functions of a compatible Sender
  • Bi-Directional RS-232 extension when used with a compatible Sender
  • 2-way IR extension when used with a compatible Sender
  • Digital (optical and coaxial) and Analog audio breakout
  • Bi-Directional Power over HDBaseT™ (POH) provides power to the Receiver or a compatible Sender unit over the link cable - only one side will need external power
  • Uses Gefen’s implementation of HDBaseT™ technology with enhanced features
  • Field-updateable firmware via RS-232 and using the Gefen Syner-G™ software
  • Locking power connector
  • Compact, ultra-low-profile enclosure is surface-mountable and can be hidden away

Gefen EXT-UHDA-HBTL-RX Specifications

Shipping Info
  • Unit of MeasureEach
  • UPC888814999907

Other Specifications

  • Maximum TMDS Clock 300 MHz
  • Total Signal Bandwidth/Data Rate 10.2 Gbps
  • Video Output Connector (1) HDMI Type A 19-pin, female
  • Link Connector (1) RJ-45, shielded
  • L/R Analog Audio Output port (1) 3.5mm mini-stereo jack
  • Optical Digital Audio Output port (1) TOSLINK®
  • Coaxial Digital Audio Output port (1) RCA, female
  • RS-232 port (1) 3-pin Phoenix
  • IR In/Ext port (1) 3.5mm mini-stereo jack
  • IR Out port (1) 3.5mm mini-mono jack
  • IR Extender type EXT-RMT-EXTIRN
  • Power Indicator LED (1) Blue
  • Link Indicator LED (1) Green
  • HDCP Indicator LED (1) Green
  • RS-232 Pass-Thru/Prog Switch (1) 3-position, slide-type
  • Power Supply (1) 12V DC, locking, 5.5mm barrel/2.1mm pin
  • Power Consumption Not powering a Sender 9W maximum
  • Powering a Sender 22W maximum
  • Operating Temperature +32 to +122 °F (0 to +50 °C)
  • Operating Humidity 5% to 90% RH, non-condensing
  • Storage Temperature -4 to +185 °F (-20 to +85 °C)
  • Storage Humidity 0% to 95% RH, non-condensing
  • MTBF 50000 hours
  • Overall Dimensions (W x H x D, not including the connectors) Not including the mounting brackets: 6" x 0.65" x 4" (152mm x 17 x 100mm)
  • Including the mounting brackets: 7" x 0.65" x 4" (178mm x 17 x 100mm)
  • Net Weight 0.6 lbs. (0.27 kg)
  • Shipping Weight 1.5 lbs (0.7 kg)
* Features and specifications are subject to change without notice.

In The Box
  • Receiver unit (EXT-UHDA-HBTL-RX)1
  • 12V 3A Power Supply (EXT-PS12U3IP-LP21-6)1
  • 3-pin Phoenix plug (attached to unit)1
  • Mounting Brackets 2
  • Quick Start Guide1

* Features and specifications are subject to change without notice.

Product Documents

No documents available

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.


Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Australia Post and Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 


You can track your shipment through the web sites of our couriers:

Australia Post

Star Track Express 

We will email the tracking number for your shipment shortly after it’s been despatched. If you have any questions regarding shipping, please contact us.


Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.


Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.