• Integra 2 Channel Receiver BT/Wi-FI Airplay Network Zone 2 Pre-Out & A+B

Integra 2 Channel Receiver BT/Wi-FI Airplay Network Zone 2 Pre-Out & A+B

Product Code: IS-DTM-40.7B

Integra Series
RRP $1,395.00
Unit of Measure


5 Year
Technical Specifications
Brands Integra
Channel count 2
  • Details
  • Downloads
  • Where to Buy
  • Ordering

Integra DTM-40.7 - 2 Channel DAB+ Receiver


The DTM–40.7's dynamic high current amplification fills your room with clear, energetic sound from any source.


Hand Selected Parts Tuned for Audio

To ensure low-impedance and high-current performance, the DTM-40.7 employs fully discrete output stage circuitry, a massive high current power supply and two custom made 8,200 μF high current capacitors. 80 watts per channel at 8 ohms / 110 watts per channel at 6 ohms are packed into an anti-vibration oval chassis with an anti-resonant front panel, and the non-phase-shift amp design produces stunningly realistic sound imaging.

Network Streaming Services

The DTM-40.7 has AirPlay, Wi–Fi and Bluetooth technologies built in. It comes loaded with Spotify, Pandora, SiriusXM Internet Radio, Slacker, AUPEO! and vTuner. Select a station and search for music available on these services via the Integra remote control app on your smartphone.

Great Sound From Any Format

An Asahi Kasei AK4452 digital–to–analog converter unlocks the full potential of any audio format with its unique low-distortion sound–enhancing filtering technologies. Plays will with compressed, lossless, and hi-res audio via Local Network (MP3, WMA, WMA Lossless, FLAC, WAV, Ogg Vorbis, AAC, Apple Lossless, DSD 5.6 MHz, and LPCM).

App Control

The Integra Remote app for iPod touch®/iPhone,® Android, and Kindle devices is a convenient way to control your home entertainment from anywhere within wireless range. The app has a clear graphical interface to control playback, adjust settings and handle content across multiple zones. The app serves hi-res, lossless, and compressed audio files (including 192 kHz/24-bit FLAC, DSD, and Dolby® TrueHD) to the DTM-40.7 from your mobile devices, and gives it stunning sound.

Fluid Control Across Inputs and Zones

The full-function RI remote control allows for direct access tuning with 10 Key Buttons. Use the front panel USB port for easy playback of stored WAV 96 kHz, DSD 2.8 MHz, and MP3 audio files. Zone 2 options include Pre / Line-out for playback in another room; Zone 2 DAC for NET and USB sources, and a Zone 2 subwoofer pre-out and independent Zone 2 bass, treble, and balance control. Automatic power on/wake-up via optical audio sensing is a very unique feature and is "custom" friendly. This feature, combined with power on volume settings and maximum volume settings, make it easier to integrate 3rd party sources that are primarily app driven.

Perfect for Custom Installation

Integra products are designed and engineered to meet the demands of custom audio/video systems installers. The DTM-40.7 includes system integration connectivity such as RS232 and IP control with support for 2-way communication with 3rd party home automation systems. A pair of infrared (IR) inputs and an IR output make for a clean, reliable installation and allow pass-through of IR signals to control other devices connected to the DTM-40.7 such as a turntable, lighting or window treatments. Three fully programmable 12 volt triggers can be used to dim lights, power on/off a turntable and open/close the drapes all with the touch of a button! Optional rack mount kits for all models provide a clean, finished look when installed in racks and cabinets. Integra works closely with control systems partners such as Savant, Crestron, URC, and RTI, and AMX Device Discovery for simplified system integration.

Advanced Features


  • AKM AK4452 384 kHz / 32-bit Hi-Grade DAC
  • Wi-Fi® Certifi ed Wireless LAN Capability
  • Bluetooth Version 2.1 + EDR Capability (Compatible Profi le: A2DP v1.2, AVRCP v1.3)
  • Apple AirPlay Support for Wireless Music Streaming
  • WRAT (Wide Range Amplifi er Technology)
  • Hand Selected, Audio Tuned Parts to Ensure Low-Impedance, High- Current Performance
  • Fully Discrete Output Stage Circuitry
  • H.C.P.S. (High Current Power Supply) Massive High Power Transformer
  • Two Custom-Made 8,200 μF Hi-Current Capacitors
  • Non-Phase-Shift Amp Design for Realistic Sound Imaging
  • Front USB Port Supports WAV 96 kHz, DSD 2.8 MHz, and MP3 Playback
  • Mass Storage Class USB Memory Playback Capability
  • Control and Stream with Free Integra Remote Apps for iPod touch® / iPhone®*1 and Android Devices*2
  • Plays Compressed, Lossless, and Hi-Res Audio via Local Network (MP3, WMA, WMA Lossless, FLAC, WAV, Ogg Vorbis, AAC, Apple Lossless, DSD 5.6 MHz, and LPCM)
  • Internet Radio and Music Streaming Subscription Services Included (TuneIn Radio, Pandora®, Slacker™, SiriusXM Internet Radio®, Spotify, and Deezer)*3
  • Certified with DLNA Version 1.5
  • Direct Mode
  • Audio L / R and Subwoofer Pre Outs
  • Speaker A / B Drive

*1 Compatible with iPod touch (3rd generation or later) and iPhone 3GS or later. All models require iOS 4.2 or later. *2 Requires Android™ 2.1 or later. *3 Availability of services depends on region.

Other Features

  • 80 Watts per Channel at 8 Ohms, 20 Hz–20 kHz, 0.1% THD, 2 Channels Driven, FTC 110 Watts per Channel at 6 Ohms, 1 kHz, 0.1% THD, 1 Channel Driven, FTC
  • 4 Digital Audio Inputs (2 Optical and 2 Coaxial)
  • 6 Analog Audio Inputs (Excluding Phono Input) and 2 Outputs
  • Phono Input (MM) for Turntable Connection
  • Quarter-Inch Headphone Jack
  • Transparent High-Grade Banana Plug-Compatible Speaker Terminals
  • Auto Power On via Optical When Signal is Detected
  • Anti-Resonant Aluminum Front Panel
  • Anti-Vibration Oval Chassis
  • Independent Bass, Treble, and Balance Control
  • 3-Mode Display Dimmer (Normal / Dim / Dimmer)
  • 40 FM / AM Random Presets
  • Direct-Access Tuning with 10 Key Buttons (via Remote)
  • Preset Station Naming (Up to 10 Characters)
  • Sleep Timer
  • Full-Function RI Remote Control

Custom Integration Features

  • Bi-Directional Ethernet and RS232 Port for Control
  • Zone 2 Pre / Line-Out for Distributed Audio Playback in Another Room
  • Zone 2 DAC for SPDIF, NET and USB Sources
  • Zone 2 Subwoofer Pre Out
  • Independent Zone 2 Bass / Treble / Balance Control
  • Dealer Settings Memory Store and Recall
  • 2 IR Inputs and 1 Output
  • 3 Programmable 12 V Triggers (with Adjustable Delay)
  • Optional Rack-Mount Kit Available (IRK-130-3B)


Amplifier Section
Power Output
All Channels :

  • 110 W/Ch at 6 Ohms, 1 kHz, 0.1% THD, 1 Channel Driven, FTC
  • 80 W/Ch at 8 Ohms, 20 Hz–20 kHz, 0.1% THD, 2 Channels Driven, FTC

Dynamic Power :

  • 190 W (3 Ohms, Front)
  • 170 W (4 Ohms, Front)
  • 110 W (8 Ohms, Front)

THD+N (Total Harmonic Distortion + Noise) :

  • 0.08% (20 Hz–20 kHz, Half Power)

Input Sensitivity and Impedance :

  • 200 mV / 47 k-Ohms (Line)
  • 3.5 mV / 47 k-Ohms (Phono MM)

Rated RCA Output Level and Impedance :

  • 1.0 V / 500 Ohms (Pre Out)
  • 1.0 V / 680 Ohms (Subwoofer Pre Out)
  • 1.0 V / 2.2 k-Ohms (Zone2 Pre / Line Out)

Phono Overload :

  • 70 mV (MM 1 kHz 0.5%)

Frequency Response :

  • 10 Hz–100 kHz / +1 dB, -3 dB (Direct Mode)

Tone Control :

  • ±10 dB, 100 Hz (Bass)
  • ±10 dB, 10 kHz (Treble)

Signal-to-Noise Ratio :

  • 106 dB (Line, IHF-A)
  • 80 dB (Phono MM, IHF-A)

Speaker Impedance :

  • 4 Ohms–16 Ohms
  • 6 Ohms–16 Ohms

Headphone Output Impedance :

  • 390 Ohms

Headphone Rated Output :

  • 200 mV (32 Ohms 1 kHz 10% THD)

Tuner Section
Tuning Frequency Range :

  • FM 87.5 MHz–107.9 MHz
  • AM 530 kHz–1,710 kHz

FM / AM Preset Memory :

  • 40 stations

Dimensions (W x H x D):

  • 435 x 149 x 328 mm

Weight :

  • 8.5 kg



Product Documents

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.


Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Australia Post and Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 


You can track your shipment through the web sites of our couriers:

Australia Post

Star Track Express 

We will email the tracking number for your shipment shortly after it’s been despatched. If you have any questions regarding shipping, please contact us.


Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.


Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.