Radial FIREFLY Tube DI

Class-A Tube Direct Box

»  View entire Radial Engineering range

Radial Engineering's new FIREFLY tube direct box is a fully discrete class-A unity gain amplifier designed for both studio and live performance applications.

The Firefly has been designed to the most exacting engineering & performance standards and is packed with features that will surely make it a favorite for the more demanding live touring professional as well as a superb choice for direct studio recording.

The Radial Firefly begins with two inputs, each of which features a separate level control to enable the artist to set each instrument with optimal gain. Switching between inputs can be can be done using the front panel switch or via the optional JR2 remote footswitch. The instrument signal is immediately routed to a tuner output that is always on. When used with the JR2 footswitch, the Firefly may also be muted remotely for quiet on-stage tuning. Both the footswitch and front panel are equipped with LED indicators for status monitoring.

Following the award-winning Radial JDV, the Firefly’s front end circuit is 100% discrete class-A and is void of any circuit stabilizing negative feedback. This produces a more open, less constricted sound. The Firefly is also equipped with Drag Control load correction that enables the artist to adjust the load on the magnetic pickup for a much more natural rendering. When bypassed, the load jumps to 4 meg-ohms enabling the Firefly to be used with piezo pickups such as common with upright bass and other acoustic instruments.

The Firefly's exceptional warmth & detail is achieved by combining Radial’s unique front end with an all new12AX7 tube drive circuit. Contrasting the input sensitivity with the output drive enables the artist to fine tune the grit or edge to give the sound more character. And to add even more fun, the Firefly comes shipped with two 12AX7 tubes, a select premium tube for audiophile performance and a low-fi version for added growl.

As the Firefly will likely become a favorite with acoustic instruments, a fully variable high-pass filter has been added that enables the engineer to set the bass cut-off frequency for optimal layering. This ‘Nashville trick’ lets you set the cut-off to better match the size of the instrument whereby a lower cut-off would be used on contrabass, slightly higher on acoustic and higher again on fiddle or mandolin. By setting a different cut-off for each instrument one can eliminate resonance while still retaining the character. The result is a better sounding mix.

Connectivity is extensive: The rear panel begins with two stacked ¼” instrument inputs. A second set of stacked ¼” jacks presents the user with a buffered thru-put that delivers either the original instrument’s tone or the output from the tube circuit. Below, an insert jack enables one to add in effects in series with the tube drive circuit and apply the effects to the overall sound. The third set of stacked jacks feature a tuner output and a TRS jack for the JR2 remote control. The Radial transformer coupled XLR output is outfitted with a ground lift switch and a 180º polarity reverse. This can be helpful when controlling feedback or interfacing with older vintage gear. Power is supplied via an exterior switching supply for 100V to 240V operation and delivers a variable output that ranges from a typical unity gain DI level to a full +4dB line level for direct recording.

As with all Radial products, the Firefly is road-ready with 14 gauge steel construction plus a protective zone around the controls & switches. This is augmented with steel-cased switches & pots plus a double sided military-grade PCB for added life. The Firefly comes with a carry handle that may be removed should rack-mounting be needed for touring using optional rack-mount kits.

Find your nearest dealer

Need help finding a dealer?

If you have difficulty in finding a dealer please contact us directly. We can help identify the most suitable dealer for your needs.


Find your nearest service agent

Need help finding support?

If you have difficulty in finding support, please contact us directly. We can help identify the most suitable agent for your needs.