This is a Special Order Item

E-Vision Laser 4K HB 7500 Lumens

Product Code: DA-118-150

Digital Projection
Quantity In Cart:  
Unit of Measure


5 Year
Technical Specifications
Brands Digital Projection
Aspect Ratio 16:9
Native Resolution 4K
Projector Category Large Venue
Series E-Vision
  • Details
  • Downloads
  • Where to Buy
  • Ordering

E-Vision Laser 4K-UHD Black

7,000 ANSI / 7,500 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) 1,000:1 native | Part Number: 118-150


Colour System: DMD Specification:

  • Laser Phosphor with colourwheel

Display Type:

  • 1 x 0.67" WQXGA+ TRP UHD DMD™

Display resolutions

  • 4K-UHD (3840 x 2160) or WQXGA+ (2716 x 1528)
  • 8.3 megapixels on screen at 4K-UHD
  • Fast transit pixels for smooth greyscale and improved contrast. 

Aspect Ratio:

  • 16:9 

Fill Factor

  • Not applicable: Smooth Picture DMD™


Key Features

  • Video & Graphics Processing
  • Two projectors in one - 4K-UHD and WQXGA+.
  • DisplayPort 1.2.
  • 2 x HDMI 2.0.
  • 2 x HDMI 1.4b for Dual Pipe processing and Frame Sequential 3D format.
  • Sequential Processing: 3D via single HDMI 1.4b input.
  • Dual Pipe Processing: 3D Left and Right Eyes via two HDMI 1.4b inputs.
  • Synchronisation of active glasses.
  • 3G-SDI with loop-through.
  • DICOM simulation mode.


Geometry Correction

  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation.
  • Non-linear warp.
  • Digital zoom, pan and scan.
  • Blanking control for custom input window sizing.
  • Scaling available for fixed aspect ratio screens.
  • Unscaled processing for pixel mapped display.

Edge Blending

  • Blending control available for all sides with width control.
  • Correction for non-active pixels at the edge of the display.

Picture in Picture

  • Two sources can be displayed simultaneously using 2D inputs: either picture in picture (PIP), or side by side (PBP), with original aspect ratios maintained.

HDBaseT® Interface

  • Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows projector to be placed up to 100m from source with low cost cabling.
  • Supports up to 4K UHD 3840 x 2160@60Hz 4:2:0 or 4K UHD 3840 x 2160@30Hz 4:4:4

Colour Processing

  • Four colour modes available.
  • Powerful seven point colour correction for accurate colour matching with presets.
  • Easy colour temperature selection.
  • Manual seven point colour adjustment.
  • Traditional lifts and gains.

Projector Controller Software

  • Intuitive user interface for network control.
  • Simultaneous control of user-defined groups of projectors.
  • At-a-glance monitoring of projector status.

Projector Automation

  • Real-time clock provides daily on/off automation.
  • E-mail alerts for system status.

Source Compatibility:

  • 2D graphics standards up to 4K-UHD 3840 x 2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0) and DisplayPort inputs.
  • 3D graphics standards up to WQXGA at 120Hz DualPipe via HDMI 1.4b inputs.
  • 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.

WQXGA+ mode

  • 2D sources up to WQXGA+ at 120Hz can be displayed scaled to fit WQXGA+.
  • 3D sources up to WQXGA at 120Hz can be displayed scaled to fit WQXGA+.

4K-UHD mode

  • 2D sources up to 4K-UHD will be displayed scaled to fit 4K-UHD.

Auto mode

  • Sources greater than WQXGA+ will be displayed scaled to fit 4K-UHD.
  • Sources up to WQXGA+ will be displayed scaled to fit WQXGA+.



Video & Computer

DisplayPort 1.2 (2D) x1
HDMI 1.4b (3D) x2
HDMI 2.0 (2D) x2
3G-SDI in (2D) x1
3G-SDI out x1
HDBaseT (see LAN) (2D) x1

Communication & Control

3D Sync Out x1
3D Sync In x1
LAN x2
RS232 x1
Wired Remote x1
12V Trigger x2
3D Sync IR Out x1

NOTE: One of the LAN ports is shared with HDBase-T. 

3D Formats Supported

  • Frame Sequential
  • Dual-Pipe 

HDTV Formats Supported

  • 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz, 100Hz, 120Hz)
  • 1080i (50Hz, 60Hz)
  • 720p (50, 60Hz)
  • 2K (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
  • 4K-UHD (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)

Computer Compatibility 


  • 4K-UHD up to 60Hz.
  • WQXGA+ up to 120Hz.


  • Supported formats will be displayed within WQXGA+.


  • 498 megapixels per second via DisplayPort and HDMI 2.0.

Remote Control

  • Addressable IR remote control, wireless and wired.
  • On-Board keypad

Automation Control

  • Crestron RoomView® Connected
  • PJLink Class 1
  • LAN
  • RS232
  • AMX (Device Discovery)
  • Served web pages (projector status, projector control, Crestron RoomView®, network settings, alert mail setup, time setup, error log, On Screen Display)

Colour Temperature 

  • 3200K to 9300K 

illumination Type

  • Laser Light Source

Typical illumination Life

  • 20,000 hours




Part No.

Focus Range

Lens Shift

0.38 :1 fixed 117-341 0.68m - 2.44m none
0.76 :1 fixed 112-499 0.81m - 5.08m none
0.74 - 0.93 :1 zoom 115-339 1.02m - 12.7m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
1.24 - 1.78 :1 zoom 112-500 1.33m - 11.73m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
1.71 - 2.25 :1 zoom 112-501 1.83m - 14.9m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
2.20 - 3.67 :1 zoom 112-502 2.36m - 24.2m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
3.54 - 5.36 :1 zoom 112-503 3.8m - 35.35m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
5.24 - 8.27 :1 zoom 112-504 5.59m - 54.8m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame


Lens Mount

  • Motorised and programmable shift, zoom and focus.
  • Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).

Mechanical Mounting

  • Front/Rear Table
  • Front/Rear Ceiling
  • Adjustable Front/Rear Feet


  • Table Top or Inverted: Yes 
  • Pointing Up: Yes 
  • Pointing Down: Yes 
  • Roll (Portrait): Yes

Weight (Chassis Only)

  • 28.15 kg 


  • L: 58.0 cm W: 50.0 cm H: 21.1 cm 
  • L: 22.8 in W: 19.7 in H: 8.3 in

Safety & EMC Regulations


Product Documents

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.


Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 


You can track your shipment through the web sites of our couriers:

Star Track Express 

Tracking numbers for your order can be found in the order history section of your dashboard. If you have any questions regarding shipping, please contact us.


Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time. Please note that finalized sales for special order items cannot be cancelled.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.


Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.