Signal extension

GTB-UHD600-HBT 4K Extender w/ HDR, RS232, 2way IR, POL

Product Code: GE-TUHD600HBT

Brand
Gefen
$969.00 inc GST
In Stock
Increase value Decrease value
Unit of Measure
EACH
3 Year
Technical Specifications
Brands Gefen
Input/output type HDMI
  • Details
  • Downloads
  • Where to Buy
  • Ordering

4K Ultra HD 600 MHz HDBaseT Extender w/ HDR, RS-232, 2-way IR, and POL

GTB-UHD600-HBT

Extend Full-Bandwidth HDMI 2.0 w/ HDR up to 80 meters/264 feet, over a single CAT-5

The Gefen GTB-UHD600-HBT is a compact and high-performance solution for extending full-bandwidth HDMI 2.0 audio/video with HDR up to 80 meters (264 feet), over a CAT-5e or better cable. It supports 18.2 Gbps of data throughput and 600 MHz TMDS Clock frequency, the highest specified under the HDMI 2.0 standard. This extender uses HDBaseT™ technology along with Gefen’s visually lossless proprietary compression algorithms with very high PSNR (Peak Signal to Noise Ratio), to accommodate resolutions up to 4K Cinema-DCI (4096 x 2160 to 60 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:4:4) with HDR. High Dynamic Range (HDR) delivers greater contrast between light and dark areas of a video image, resulting in tremendous improvement in picture quality and color depth. HDCP 2.2 and the legacy HDCP 1.4 are both supported. The GTB-UHD600-HBT also supports 1080p Full HD, WUXGA (1920 x 1200), 3DTV, and Deep Color (up to 1080p resolution). Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ are passed through to the HDMI outputs. The GTB-UHD600-HBT provides RS-232 and 2-way IR extension between the Sender and the Receiver units, facilitating the control of A/V sources placed near the Sender unit and sending automation commands to the display or another device placed near the Receiver unit. Gefen’s Bi-Directional POL (Power Over Line) technology powers the Sender or the Receiver unit using the same cable that extends the HDMI signal. Only one of the two units will need a power supply. This feature simplifies installation in cases when an electrical outlet may not be available near the source or the display. Small, low profile enclosures can be securely surface-mounted and conveniently hidden away from sight, and accommodate Gefen locking HDMI cables for secure connections.

Note:
Shielded (STP) CAT-6A is recommended. Shielded (STP) CAT-5e or unshielded (UTP) CAT-5e or CAT-6A may be acceptable depending on cable quality but is not the preferred choice. Care should always be given to keep these cables away from power lines and other sources of electromagnetic interference.

Gefen GTB-UHD600-HBT Features at a Glance
    • Supports 18.2 Gbps bandwidth and 600 MHz TMDS clock
    • Extends HDMI, RS-232, & Bi-Directional IR over a single CAT-5e/CAT-6A:
      • 4K Ultra HD (3840 x 2160 to 60 Hz, 4:4:4), up to 264 feet/80 meters (8-bit color)
      • 4K Cinema (DCI) (4096 x 2160 to 60 Hz 4:4:4), up to 264 feet/80 meters (8-bit color)
      • 1080p Full HD (60 Hz) and WUXGA (1920 x 1200 to 60 Hz), up to 330 feet/100 meters (up to 12-bit Deep Color)
  • HDMI Features Supported:
    • HDMI 2.0 (full bandwidth to 18 Gbps/600 MHz)
    • HDR (High Dynamic Range) 10-bit Deep Color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4
    • HDCP 2.2 and 1.4
    • 12-bit Deep Color (at 1080p)
    • Uncompressed LPCM digital audio up to 7.1 channels
    • HBR (High Bit Rate) digital audio up to 7.1 channels, including Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™
    • 3DTV pass-through
    • CEC pass-through
    • Lip Sync pass-through
  • Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920x1200), with Gefen CAB-DVI2HDMI-LCK DVI-to-HDMI cables (not included)
  • RS-232 2-way link between Sender and Receiver
  • IR extension from Sender to Receiver and from Receiver to Sender
  • Gefen’s Bi-Directional POL provides power to the Sender or the Receiver unit over the link cable - only one side will need external power
  • Uses Gefen’s implementation of HDBaseT™ technology with proprietary algorithms and enhanced features
  • Advanced EDID Management
  • Firmware updatable via RS-232
  • Locking power connector
  • Surface mountable
  • Plug & Play – no configuration or set-up required for most applications
  • Compact enclosures are easy to install and can be hidden away

* Features and specifications are subject to change without notice.

Specifications

Maximum TMDS Clock 600 MHz
Total Signal Bandwidth/Data Rate 18.2 Gbps
Video Input Connector (Sender) (1) HDMI Type A 19-pin, female, locking
Video Output Connector (Receiver) (1) HDMI Type A 19-pin, female, locking
Link Connector (Sender/Receiver) (1) RJ-45, shielded
RS-232 port (Sender) (1) 3-pin Phoenix
RS-232 port (Receiver) (1) 3-pin Phoenix
IR In/Ext port (Sender/Receiver) (1) 3.5mm mini-stereo jack
IR Extender type EXT-RMT-EXTIRN
IR Out port (Sender/Receiver) (1) 3.5mm mini-mono jack
Power Indicator LED (Sender/Receiver) (1) Blue
Link Indicator LED (Sender/Receiver) (1) Green
HDMI-Active Indicator LED (Sender/Receiver) (1) Green
Power Supply (1) 12V DC, locking, 5.5mm barrel/2.1mm pin
Power Consumption (Sender and Receiver combined) 14W maximum
Operating Temperature +32 to +113 °F (0 to +45 °C)
Operating Humidity 5% to 90% RH, non-condensing
Storage Temperature -4 to +185 °F (-20 to +85 °C)
Storage Humidity 0% to 95% RH, non-condensing
MTBF 50000 hours
Dimensions (W x H x D, Sender/Receiver) 4.7" x 1" x 2.9" (119mm x 26mm x 73mm)
Net Weight (Sender/Receiver) 0.3 lbs. (0.14 kg) each
Shipping Weight 2.1 lbs (0.95 kg)

In The Box
  • Sender Unit (GTB-UHD600-HBT-TX) x1
  • Receiver Unit (GTB-UHD600-HBT-RX) x1
  • HDMI-to-HDMI Male-to-Male Locking cable, 6 feet x1
  • IR Emitter (EXT-IREMIT) x1
  • IR Extender (EXT-RMT-EXTIRN) x1
  • 12V DC power supply with US/EU/UK/AU reginal AC plugs and 5.5mm/2.1mm DC plug (EXT-PS121.5AIP-LP-6) x1
  • Quick-Start Guide x1

Product Documents

No documents available

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.

Shipping

Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Australia Post and Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 

Tracking

You can track your shipment through the web sites of our couriers:

Australia Post

Star Track Express 

We will email the tracking number for your shipment shortly after it’s been despatched. If you have any questions regarding shipping, please contact us.

Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.

Returns

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.