Hearing augmentation

Ir Modulator 2 Ch *Mn* MOD232 Williams AV

Product Code: WI-MOD232

Brand
Williams AV
RRP $3,749.00
 
 
Unit of Measure
EACH

 

1 Year
Technical Specifications
Brands Williams AV
  • Details
  • Downloads
  • Where to Buy
  • Ordering

MOD 232


2-CHANNEL INFRARED MODULATOR

Each microprocessor-controlled MOD 232 modulator handles two audio channels. Baseband outputs can daisy-chain two MOD 232 together for four-channel operation. Flexible combination jacks permit balanced/unbalanced line-level inputs. Carrier frequencies are controlled by the microprocessor and a frequency synthesizer for rock-solid frequency control.

system includes
  • (1) MOD 232 two-channel infrared modulator
  • (1) TFP 016 power supply for the USA. TFP 027 for other countries

features
  • Switchable 2.3/2.8/3.3/3.8MHz
  • Accepts mic and line inputs
  • Adjustable volume control
  • 5-year warranty (90 days on accessories)

Specifications

mod 232 architectural and engineering specifications
  • The infrared system shall consist of separate modulator and emitter units, with portable receivers. The modulator unit shall be a half-rack style, metal enclosure. A rack panel shall be available to mount one or two modulator units within a single EIA rack space. An adjustable floor stand and mounting bracket shall be available to mount the modulator and emitter together for portable operation.
  • The modulator shall provide two channels of selectable FM carrier signals, 2.3/2.8/3.3/3.8 MHz, so that a single modulator can be used to simultaneously transmit up to two channels, and two modulators can be ganged together to transmit up to four channels simultaneously. The carrier signals shall use 50 kHz deviation and 50 µS pre-emphasis. The carrier signals (baseband) shall be transmitted to one or more emitters by 50 ohm RG58 coaxial cable with BNC-type connectors. A BNC–type baseband input jack and baseband output jack shall be provided on the modulator. The modulator shall be powered by an external 24 VAC, 10 VA, 50-60 Hz power supply, connected via a three-pin Molex power connector.
  • It shall have a rocker-type power switch, power LED indicator, four carrier indicator LEDs and two bar graph-type LED audio indicators. The modulator shall have a modulated IR LED on the front panel for testing purposes, and a headphone jack that accommodates mono and stereo 1/4" headphones, and channel monitoring switch. The modulator shall have two rotary audio input level controls, and a screwdriver adjustable control for varying the input compression from 1:1 or 2:1. The modulator shall have two timers that automatically shut off the carriers when there is no audio signal present for 15 minutes. The modulator shall have two combination input jacks that accept 3-pin XLR plugs for balanced microphone input or 1/4" TRS plugs for balanced or unbalanced line-level inputs. The XLR inputs shall be low impedance, accept signal levels from 100 µV to 90 mV and supply 15 V simplex power per DIN45596. The TRS jacks shall accept balanced or unbalanced audio signal levels from 21 mV to 10 V. The modulator shall have CE, FCC, RoHS, and WEEE approval and carry a five-year parts and labor warranty.*
  • The modulator shall be the Williams Sound model MOD 232.
mod 232
  • Size, Weight: 8.5" W x 8.2" D x 1.7" H (21.5 cm x 20.8 cm x 4.4 cm), 3.1 lbs (1.5 kg)
  • Color: Black epoxy paint with white legends
  • Rack Mount: 1/2 rack space wide, 1 rack space high, one or two modulators may be mounted in a single IEC rack space with RPK 005 (single) or RPK 006 (double) Rack Mount Kits
  • Power Supply:
    • Wall Transformer, 24 VAC, 50-60 Hz, 15VA
    • North America: TFP 016, UL/CSA
    • Europe: TFP 027-01, 2-pin Schuko plug, CE
    • UK: TFP 027-02, 3-pin UK plug, CE
  • Modulation: FM Wideband, +50 kHz deviation, 50 uS pre-emphasis
  • Carrier Frequency:
    • Channel A: Selectable, 2.3/2.8/3.3/3.8 MHz,
    • Channel B: Selectable, 2.3/2.8/3.3/3.8 MHz
  • Signal-to-Noise Ratio: More than 60dB
  • Frequency Response: 30 to 16,000 Hz, +1 dB, -3 dB, electrical response
  • Total Harmonic Distortion: Less than 2%, electrical response
  • Audio Processing:
    • Compression (slope) adjustable from 1:1 or 2:1
    • Switchable compression gain: Moderate: 16dB. Max: 33dB
  • Auto Carrier Shut-Off: 15-minute timer shuts off carrier when no audio is present (can be disabled)
  • Power Switch: Two-position push button, ON/OFF
  • Power Indicator: Green LED
  • Audio Level Controls: CHA and CHB Input Level, rotary knobs
  • Audio Indicators: CHA and CHB Audio Level, 10-segment LED’s
  • Carrier LEDs: 4 green LED carrier “on" indicators per channel (indicates frequency, malfunctions)
  • Compress Control: 1:1 or 2:1
  • Input Mix LED: Indicates inputs A and B audio are mixed and transmitted by CHA and CHB off
  • Stereo LED: Indicates stereo mode
  • Phones Switch: Selects CH1 or CH2 for phones when not in stereo mode
  • Phones Output: 1/4" TRS headphone jack. Accepts stereo, mono and any impedance phones.
  • Infrared Test LED: IR LED for receiver testing, monitoring and audio signal testing.
  • Power Input: 3-Pin Molex, 24 VAC, 50-60 Hz, 15 VA
  • Audio Input Jack: CHA and CHB combination XLR/TRS jack
  • Mic Level: Balanced, Lo-Z, 100 µV min. to 90 mV max., 1 mV nominal, 3kΩ input impedance, supplies switchable simplex power per DIN 45596 for condenser mics
  • Line Level: Balanced or unbalanced, 21 mV min. to 10V max., 212 mV nominal, 100 kΩ
  • Audio Line Output Jacks: RCA Jack, CHA and CHB, 500 mV, unbalanced, 100 Ω source impedance, load impedance must be greater than1 kΩ
  • Configuration Switches: CHA and CHB 8-position DIP switch, selects Mic/Line input, compressor gain, simplex power, discrete or mixed inputs, carrier frequency, channel disable, auto shut-off timer
  • Baseband Input Jack: BNC, allows mixing with additional MOD 232 Modulator (4CH operation), 100 mV, 50 Ω input impedance, use with MOD 232 or MOD 112 (111), BNC, RG-58 Cable
  • Baseband Output Jack: Two BNC jacks carry baseband signal, 100 mV/channel, 50 Ω source impedance, for use with WIR TX9 or MOD 232 only
  • Approvals: CE, FCC, RoHS, WEEE
  • Operating Requirements: 0-50º C ambient temperature, non-condensing, non-corrosive atmosphere
  • Warranty: 5 years on modulator*

Product Documents

No documents available

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.

Shipping

Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Australia Post and Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 

Tracking

You can track your shipment through the web sites of our couriers:

Australia Post

Star Track Express 

We will email the tracking number for your shipment shortly after it’s been despatched. If you have any questions regarding shipping, please contact us.

Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.

Returns

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.  

Accessories

  inc GST
RRP $169.00
 
(Each)
  inc GST
RRP $169.00
 
(Each)
  inc GST
RRP $299.00
 
(Each)