Ceiling and in-wall speakers

Dali PHANTOM M375 In-Wall (ea) 3 x 7" Woofers Hybrid Tweeter LCR

Product Code: DL-PHANTM375

Brand
Dali
RRP $1,599.00
 
 
Unit of Measure
EACH

 

5 Year
Technical Specifications
Brands Dali
Series Phantom Series
Size 3 x 7"
  • Details
  • Downloads
  • Where to Buy
  • Ordering

DALI PHANTOM M-375

The slim and powerful PHANTOM M-375 speaker is developed for multi-channel in-wall installation. Featuring 3 x 7 inch woofers, it offers spacious and roomfilling DALI sound in your home cinema - without physically dominating you living room.


WIDE DISPERSION
All speakers by DALI are designed around the principle of wide dispersion. This entails an off-axis optimisation of the audio reproduction. The technology is perfect for use in install speakers, since they are always mounted flush against either a wall or ceiling.

SLIM CABINET
One of our goals for the PHANTOM S and M models was to create high-end in-wall speakers with a slim profile that allowed for maximum flexibility when installed. We achieved this by keeping the cabinet depths at only 100-103 mm, which fits into almost any standard wall.

MAGNETIC GRILLE
The magnetic floating front grille forms the visual presence of the PHANTOM S and M speakers. The discreet, simple, but modern Nordic design is non-intrusive and at the same time pleasing to the eye.

TRADITIONAL SPEAKER TECHNOLOGIES
The high-end PHANTOM install speakers are packed with traditional speaker virtues. Not only are the wood fiber cones and ultra-lightweight soft dome tweeters mounted in a classic MDF baffle, the placement of the drivers is just similar to our traditional speakers.

PRODUCT DETAILS
The PHANTOM M series lets you enjoy a high quality audio performance from compact build-in speakers more than capable of filling a room - discreetly hidden away within your walls.

The PHANTOM M-375 features proven technology, decades of experience and many of the virtues from our reference PHANTOM S series. The PHANTOM M series presents a more compact appearance at a more affordable price point.

The PHANTOM M-375 has been developed with multi-channel in mind and is equally suited for front, center or surround positioning. But as the speaker has to abide to DALI's long-standing sound design principles, it will also work perfectly in a traditional stereo setup - with or without a subwoofer.

The M series is 100% designed and engineered in-house - and manufactured at our own factory.


WOOFERS
The PHANTOM M-375 utilizes three 7 inch wood fibre woofers - one active and two passive slaves. All three are designed with a quite "flat" cone geometry to increase the cabinet volume.

All the individual components in the PHANTOM M drivers are assembled in-house. They work in coherence to reproduce clean, detailed sound, with no colouration or unwanted distortion.

Every driver is configured to match the model they are destined for. This is done by optimising the bass drivers for long excursion, and the midrange driver for a large, useful frequency range, so roll-off is handled in the crossover and not in the driver.

This same type of optimisation is achieved for the entire range of woofers used in the M series.

The woofers make use of our patented SMC technology in the magnet system, which leads to a very low result of hysteresis and therefore minimal distortion.


HYBRID TWEETER
The PHANTOM M-375 features the DALI trademark hybrid tweeter, which offers a ribbon tweeter paired with a dome tweeter.

The DALI ribbon tweeter is a true master in horizontal distribution of high frequencies and a superb partner for the soft dome tweeter’s unique ability to reproduce the lower part of the high frequencies.

The oversized 28 mm soft dome tweeter in the PHANTOM M-375 is manufactured in-house and built for maximum dynamics, great power handling and fantastic integration with midrange frequencies.

The soft dome diaphragm is based on an ultra-lightweight weave fabric. Compared to most soft dome tweeters in the market, the DALI dome material is less than half the weight (0.060 mg per mm2). The relatively large-sized diaphragm lets the tweeter generate a higher sound pressure level with less excursion, keeping the voice coil motion to a minimum.

The soft dome tweeter is additionally optimized for a larger bandwidth in its lower frequency area. This ensures the optimal handover from the mid-woofers to the tweeter, creating a well balanced, unforced and very coherent upper midrange.

If using the M-375 as center channel in a surround setup, the hybrid tweeter module should be unmounted (unscrewed) and turned 90 degrees counter-clockwise. This way the ribbon tweeter remains vertical to secure a horizontal wide dispersion.

CABINET
Both the PHANTOM M-375 and PHANTOM M-250 feature the exact same size cabinet - including a shallow mounting depth of only 100 mm. This is extremely compact for a serious in-wall speaker. So in order to achieve maximum inner volume for low frequency reproduction, we decided on a cabinet made from glass-reinforced ABS material with overall superior structural strength. The twin bass ports release the pressure of the compact cabinet, resulting in a compelling spacious sound.

As both PHANTOM M models share the same cabinet size, you can wait until a later stage of the installation to decide between the two models.

The front baffle and the rim of the PHANTOM M-375 are lacquered matte black, and you will find no shiny details on the front. This allows for a seamless integration with any home cinema, as you don't want light from the projector reflecting back at you.

The slim bezels of the magnetic and fully paintable front grille allows for a non-intrusive application.


SMC
The use of SMC (Soft Magnetic Compound) has many advantages, but by introducing SMC into the area close to the magnet gap, the overarching result is a significant reduction of distortion from losses in the magnet motor.

SMC’s unique ability to deliver a high magnetic conductivity and a very low electrical conductivity, gives us all the desired qualities of a really good speaker magnet, without the traditional disadvantages.

When using iron-based magnets in speakers, the magnetisation and demagnetisation introduced by the shifting current directions does not happen at the same pace. The demagnetisation process is slower than the magnetisation. This phenomenon is called hysteresis, and is a known problem in almost all speaker magnet motor systems.

The problem with hysteresis is that it introduces an unintended resistance to the voice coil, resulting in unwanted distortion. The reason hysteresis occurs is that iron is not only magnetically conductive, but also very electrically conductive.

SMC on the other hand is very highly magnetically conductive, but has a very low electrical conductivity (approx. 1/10,000’s of iron). The result of using SMC is almost no hysteresis, and therefore no distortion.


DALI PHANTOM M-375 SPECS

  • Product series: PHANTOM
  • Frequency Range (+/-3 dB) [Hz]: 57 - 25,000
  • Sensitivity (2,83 V/1 m) [dB]: 89.0
  • Nominal Impedance [ohms]: 6
  • Maximum SPL [dB]: 107
  • Recommended Amplifier Power [W]: 30 - 180
  • Crossover Frequency [Hz]: 2,500 / 15,000
  • Hybrid tweeter module, Super high freq. driver, Quantity: 1 x 17 x 45 mm
  • Hybrid tweeter module, Super high freq. driver, Diaphragm type: Ribbon
  • Hybrid tweeter module, High frequency driver, Quantity: 1 x 28 mm
  • Hybrid tweeter module, High frequency driver Diaphragm type: Soft Textile Dome
  • Low frequency driver, Quantity: 1 x 7"
  • Low frequency driver, Diaphragm type: Wood Fibre Cone
  • Low frequency passive driver, Quantity: 2 x 7"
  • Low frequency passive driver, Diaphragm type: Wood Fibre Cone
  • Enclosure type: Vented Box (2 x bass ports)
  • Connection Input: Single Wire
  • Magnetic Shielding: No
  • Recommended Placement:
    • Centre / Soundbar
    • In-Wall
    • On-Wall
  • Dimensions (HxWxD) [mm]: 775 x 250 x 106
  • Cut-Out Dimensions (HxWxD) [mm]: 751 x 226 x 100
  • Accessories:
    • Included Manual
    • Cut-Out Template
    • 3 mm Allen Bit
  • Weight [kg]: 8.7

Product Documents

No documents available

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.

Shipping

Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Australia Post and Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 

Tracking

You can track your shipment through the web sites of our couriers:

Australia Post

Star Track Express 

We will email the tracking number for your shipment shortly after it’s been despatched. If you have any questions regarding shipping, please contact us.

Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.

Returns

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.