Hearing Loop and Induction Loop

This is a Special Order Item

Loop Amp System With Dsp DL207SYS Williams AV

Product Code: WI-DL207SYS

Brand
Williams AV
RRP $6,499.00
 
 
Quantity In Cart:  
Unit of Measure
EACH

 

2 Year
Technical Specifications
Brands Williams AV
  • Details
  • Downloads
  • Where to Buy
  • Ordering

Induction Loop System with Network Control


LOOP SYSTEMS
DL207 SYS


Medium-area system offers DSP audio processing, calibration tools for ease of installation, audio override, pink noise generator, and the option of a local or PC app configuration. Dual output (2 x 7 amps). Ideal for dual-amp or phasedarray installations.


System Includes

  • (1) DL207 NET induction loop amplifier
  • (2) PLR BP1 body-pack receivers with batteries
  • (2) EAR 013 single mini earbuds
  • (1) BAT KT6 Dual Drop-in Charger Kit (includes CHG 3502 Dual Drop-In Charger and (2) BAT 026-2 AA NiMH batteries)
  • (1) PLW F500 500 ft. roll of flat power loop wire
  • (3) FWT 001 rolls of flat wire warning tape
  • (1) IDP 009 ADA wall plaque (T-Coil)
  • 5-year Warranty on amplifier


DL207 NET

GENERAL

  • Dimensions:    1 RU Rackmount, 19” W x 1.75” H x 10” D. Chassis is 17” W.
  • Weight:    DL107: 9.2 lbs (4.2 kg) DL207: 9.2 lbs (4.2 kg)
  • Color:    Case: Black, white and blue legends on front, white legends on back. LCD: Backlit Blue.
  • Fan cooling:    Variable Speed, Temperature Controlled
  • Power supply:    Internal, Universal 100-240 VAC, 50/60 Hz, 200 Watt. Fuse: 5 x 20 mm, 5 A, 250 V. AC power plug is IEC 320-C14.
  • Heat output @ 120 VAC:   
    • DL107 : Sleep State: 63 BTU/hr; Idle State: 71 BTU/hr; Driving one loop @ 9.5 A: 339 BTU/hr
    • DL207: Sleep State: 63 BTU/hr; Idle State: 84 BTU/hr; Driving two loops @ 9.5 A each: 638 BTU/hr
  • Ethernet:    (1x) RJ-45; 10-100 MBps.
  • USB:    (1x) standard-B. USB 1.1, 2.0 or 3.0 supported.
  • Environment:    0-35° C ( 32-95° F), 0-90% relative humidity,
  • Coverage area*:   
    • DL207 (dual output amplifier): 30,000 sq. ft. (2,786 sq. m.) (Perimeter Loops, 3:1 aspect ratio, both outputs driven) 18,000 sq. ft. (1,672 sq. m.) (Perimeter Loops, 1:1 aspect ratio, both outputs driven)
    • DL107 (single output amplifier): 15,000 sq. ft. (1,393 sq. m.) (Perimeter Loop, 3:1 aspect ratio) 9,000sq. ft. (836 sq. m.) (Perimeter Loop, 1:1 aspect ratio)

INPUTS

  • Dante input:    On “D” models only. (1x) RJ-45;100 Mbps. Minimum latency: 2 ms. Audio sample rates supported: 44.1, 48 kHz. Resolution: 24 bits.
  • Line inputs:    (1x) 3-position terminal block, 10 kΩ input impedance. Configurable/accepts -10 dBV, -4 dBu, +4 dBu, +8 dBu, balanced or unbalanced. Level adjustable 0 to -96 dB.
  • Mic/Line inputs:    (1x) XLR 3-pin jack. Input impedance: 1.5 kΩ Mic, 10 kΩ Line. Configurable/Accepts: Mic, Line -10 dBV, Line +4 dBu, or Line +8 dBu, balanced or unbalanced. Phantom supply (24V).
  • 70-100 V input:    (1x) 2-position terminal block; high/speaker-level input (accepts 25 V, 70 V or 100 V) from distributed audio/paging systems.

OUTPUTS

  • Line outputs:    (1x) 3-position terminal block; loop-through of Mic/Line Input 1 [&] Line Input 2, +4 dBu, Balanced or Unbalanced. The line outputs mirror the audio of the loop output.
  • Loop output(s):    (1x) 2-position terminal block per output
  • Audio output delay:    Adjustable from 0 to 165 msec
  • Headphone output:    (1x) 1/4” stereo headphone jack, on front of unit. Monitored input or output selectable in menu.
  • Loop fault relay:    (1x) 3-position terminal block providing NC, NO and Common. Contact rating: 2.0 A @ 30 VDC.
  • Loop output drive voltage:    16.1 Vrms (22.8 Vpk) continuous
  • Rated loop output current*:    9.5 Arms (13.4 Apk) per output
  • Loop resistance range:    0.5 Ω to 3.0 Ω (DC)

AUDIO

  • Rated load*:    0.5 Ω DC with 135 µH inductance
  • Frequency response:    45 Hz to 9.0 kHz ± 2 dB (1 kHz ref.)
  • Rated loop THD*:    [lt]1 % at rated output current (1 kHz sine wave).

OTHER

  • Front controls:    Front LCD display menu access/adjustment via control button/dial.
  • Adjustable settings:    Input mixing, parametric equalization, compression, metal loss compensation, high and low-pass filters, AGC and audio delay, output levels. See User Manual for adjustment range(s).
  • Internal calibration tools:    Test tone generator with pink noise, loop current adjustment/matching. See User Manual for details.
  • Other features:    Save/load configuration, loop test, priority input selection with adjustable threshold, loop fault relay, open/short and thermal protection. See User Manual for details.
  • Network control [&] firmware:    Function control and calibration by DigiLoop PC App via ethernet (RJ-45). PC App requires Windows 7 or higher. Firmware updates through USB only.
  • Warranty:    5 years
  • Approvals:    CE, UL, ULC, FCC, Industry Canada, RoHS, WEEE, CB scheme, RCM
  • Standards compliance:    This product is designed to meet the IEC-60118-4 standard when correctly designed, installed and commissioned. Test Specifications provided to the IEC 62489-1 standard.NOTE: SPECIFICATIONSSUBJECTTOCHANGEWITHOUTNOTICE.  

EAR 013

  • Plug:    3.5 mm mono
  • Cord length:    39 inches
  • Impedance:    32 Ohms
  • Frequency Range:    20 - 20kHz
  • Max input power:    5mV
  • Sensitivity:    128dB @ 1kHz
  • Driver size:    13 mm
  • Weight:    9g
  • Replacement earpad:    EAR 015 

FWT 001

  • Description:    Cloth-based warning tape, 2 in. Width, 165 ft Length per roll.
  • Dimensions:    6" Dia x 2" W x 165' L Roll
  • Weight:    1.28lbs
  • Color:    White cloth. Williams Sound logo, T-Coil Logo, and Warning Text.
  • Warning Text:    Warning: Do not cut or disturb - Hearing assistance induction loopwire
  • Used with:    PLW F300, PLW F500

IDP 009

  • 10-3/8" (L) x 6-¼" (W) x 1/8" (H)  

PLR BP1

  • Dimensions: 4.1"H x 2.85"W x 1.38"D (104 mm H x 72 mm W x 35 mm D).
  • Weight: 4.6 oz (130 g) with batteries, 2.6 oz (73 g) without batteries.
  • Color/Material: Black ABS/polycarbonate molded plastic case.
  • Battery Type: (2) AA (1.5VDC) Alkaline or NiMH (rechargeable).
  • Battery Life: Up to 200 hours with Alkaline batteries.
  • LED Indicator: Green LED indicates power on, flashes when batteries are low.
  • Headphone Jack: 3.5mm stereo TRS jack works with mono or stereo headphones.
  • Volume control: External switched thumb wheel controls power on/off and volume level.
  • Tone control: Rotary control inside battery compartment (1kHz reference at 400mA/m input with Tone at mid position)
  • Induction Coil: Maximum reception: receiver oriented vertically
  • Power Output: 35mW (max) into 33 ohms mono impedance
  • THD: [lt]2%
  • Frequency Response: 300Hz to 10KHz, -6dB

PLW F500

  • Length:    500 ft (152.4 m)
  • Width:    OD: 22 mm (with insulation) ID: 19 mm (bare copper)
  • Thickness:    OD: 0.17 mm (with insulation) ID: 0.1 mm (bare copper)
  • Spool Dimensions:    8-1/8” W x ¾” H (20.6 cm W x 1.9 cm H)
  • Spool Weight:    6.5 lbs (2.9 kg)
  • Color/Material:    Copper with Mylar (polyester) encapsulation

Product Documents

No documents available

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.

Shipping

Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 

Tracking

You can track your shipment through the web sites of our couriers:

Star Track Express 

Tracking numbers for your order can be found in the order history section of your dashboard. If you have any questions regarding shipping, please contact us.

Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time. Please note that finalized sales for special order items cannot be cancelled.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.

Returns

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.